Problem
The transmitter clips on louder words because its input sensitivity is set too high even though the recorded average level looks conservative.
Solution
Root Cause / Diagnostic:
Setting excessive transmitter input sensitivity overloads the analog-to-digital converter or front-end preamplifier before transmission. Because the camera receives an already clipped signal attenuated down the line, digital clipping occurs despite normal meter readings.
Actionable Fix:
1. Access the transmitter's gain menu and lower input gain by 6 to 12 dB until peak vocal dynamics never trigger the red clip indicator.
2. Have talent shout their loudest delivery; calibrate sensitivity so peaks hit between -18 dBFS and -12 dBFS on the transmitter meter.
3. Confirm unclipped, clean waveform capture on the receiver and camera recording monitor.
Pro Tip:
If recording unpredictable or loud speakers, deploy 32-bit float wireless transmitters to eliminate digital transmitter clipping entirely.
Setting excessive transmitter input sensitivity overloads the analog-to-digital converter or front-end preamplifier before transmission. Because the camera receives an already clipped signal attenuated down the line, digital clipping occurs despite normal meter readings.
Actionable Fix:
1. Access the transmitter's gain menu and lower input gain by 6 to 12 dB until peak vocal dynamics never trigger the red clip indicator.
2. Have talent shout their loudest delivery; calibrate sensitivity so peaks hit between -18 dBFS and -12 dBFS on the transmitter meter.
3. Confirm unclipped, clean waveform capture on the receiver and camera recording monitor.
Pro Tip:
If recording unpredictable or loud speakers, deploy 32-bit float wireless transmitters to eliminate digital transmitter clipping entirely.